Categories
Brands
Screw Anchor Bits & Accessories
Screw Anchor Bits & Accessories
AP05C-SDS 3/16" X 6" SDS-PLUS HEX SHANK 3"DD CARDED CARBIDE DRILL BIT FOR 1/4" TAPCONS
...
44-2062
TAP05C-SDS
045242110445
AP07C-SDS 3/16" X 7" SDS-PLUS HEX SHANK 4"DD CARDED CARBIDE DRILL BIT FOR 1/4" TAPCONS
...
44-2057
TAP07C-SDS
045242108671
Tapcon AP07-SDS Carbide Drill Bit - SDS/Hex, 5" Usable Length, 3/16" x 7"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1646
TAP07-SDS
AP03C-SDS 5/32" X 7" SDS-PLUS HEX SHANK 4"DD CARBIDE DRILL BIT CARDED FOR 3/16" TAPCONS
44-2058
TAP03C-SDS
045242108664
AP02C-SDS 5/32" X 6" SDS-PLUS HEX SHANK 3"DD CARDED CARBIDE DRILL BIT FOR 3/16" TAPCONS
44-2059
TAP02C-SDS
045242110421
AP04C-SDS 3/16" X 5" SDS-PLUS HEX SHANK 2"DD CARDED CARBIDE DRILL BIT FOR 1/4" TAPCONS
44-2063
TAP04C-SDS
045242110438
Tapcon AP07 Carbide Drill Bit - Straight Shank, 5" Usable Length, 3/16" x 6-1/2"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1644
TAP07
Tapcon AP08 Carbide Drill Bit - Straight Shank, 6" Usable Length, 3/16" x 7-1/2"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1648
TAP08
045996697889
Tapcon AP02 Carbide Drill Bit - Straight Shank, 3" Usable Length, 5/32" x 4-1/2"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1632
TAP02
045996697902
AP01C-SDS 5/32" X 5" SDS-PLUS HEX SHANK 2"DD CARDED CARBIDE DRILL BIT FOR 3/16" TAPCONS
...
44-2060
TAP01C-SDS
045242108657
Powers 1314-PWR 1/4" X 6" SDS-Plus Wedge-Bit - For Use With Wedge-Bolts Only
For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor.CarbideUsable Length: 4"...
Powers Fasteners
42-6757
01314-PWR
40028877374534
Tapcon AP06 Carbide Drill Bit - Straight Shank, 4" Usable Length, 3/16" x 5-1/2"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1642
TAP06
180E1125
$4.99
Each
$4.09
Each
Tapcon AP03 Carbide Drill Bit - Straight Shank, 4" Usable Length, 5/32" x 5-1/2"
Straight shank is the most usual style on modern drill bits - usually held in a 3-jaw drill chuck...
14-1634
TAP03
$3.49
Each
Tapcon 180A1126 Straight Shank Carbide Drill Bit - 3/16" x 6-3/4"
Tapcon
45-0247
180A1126
45996697872