Ridgid 50767 258 2 1/2-8" PIPE CUTTER

Ridgid 50767 Power Pipe Cutter

The RIDGID Model 258 Power Pipe Cutter cuts 2-1/2" to 8" schedule 10*/40 steel pipe,galvanized pipe,rigid conduit etc. at the job-site or in the shop.

Powered by the RIDGID No.700 Power Drive,the 258 is a displacement cutter that provides square cuts.The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation.A square cut with minimal burr on either 21"™or nipple lengths of pipe is safely achieved in seconds**without abrasive dust, sparks,or open flame.Also,the Ridgid Pipe Roller for Beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.Some of the 258 advantages follow:

• Square cut 21"™or nipple lengths of pipe without effort
• Easily cuts by displacing instead of removing pipe material
• No abrasive dust,dangerous sparks,or open flame
• Great for cutting pipe for groove joining
• Heavy-Duty design is perfect for field or shop use
• Adaptable for beveling

Specifications

Cutting Capacity: Model 258 2-1/2 "œto 8"schedule 10*/40 steel pipe No.700 RPM:33 (no load)

Weight: 105 lbs. (excludes No. 700 Power Drive)

Standard Equipment:

• (1) RIDGID 774 Square Drive Adapter
• (1) 8-1/2" HD Cutter Wheel Assembly
• (1) Hydraulic ram and foot pump
• (2) 2-1/2" to 12" Ball Transfer Pipe Supports

**Use the thin cutter wheel for best results
**Cutting time varies with pipe schedule and diameter
Note: Cutter is not recommended to cut cast iron pipe. For optimal wheel life always use pipe supports.

Ridgid 50767 Power Pipe Cutter