Lincoln Electric ED028635 Superglide S6 .035" Dia 44# Spool

Mild Steel MIG Wire (AWS ER70S-6)Lincoln's premium bare, mild steel MIG wire, SuperGlide® S6 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. S6 will tolerate higher levels of surfa...

Lincoln Electric

39-7410

ED028635

015082511443

*There will be an additional surcharge added to all welding wire after the order is finalized and when checkout has been completed. We apologize for any inconvenience.*

Mild Steel MIG Wire (AWS ER70S-6)

Lincoln's premium bare, mild steel MIG wire, SuperGlide® S6 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. S6 will tolerate higher levels of surface contaminants than ER70S-3 or S-4 electrodes. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. High silicon and manganese deoxidizer levels. SuperGlide® S6 MIG wire is the choice for you when a bare or non-copper coated ER70S-6 wire is preferred. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.
 

  • MicroGuard® Ultra surface treatment for superior feeding and arc enhancement agents for excellent arc stability.
  • Bare wire for less copper fumes.
  • Especially suited for applications where accurate wire feed over a long distance is critical or high wire feed speeds are utilized.
  • Will support all of the traditional modes of GMAW metal transfer: short-circuiting, globular, axial spray, and pulsed spray transfer.
  • Excellent spatter control and bead profile.
  • Manufactured to standards for ISO 14001 environmental and ISO 9001 quality management systems.

Typical Application:

  • For welding on base material that has medium to heavy millscale.
  • Automotive repair.
  • Sheet metal to multiple pass applications on 55,000 to 70,000 psi (379 to 483 MPa) yield strength base metal.
  • May be used in single arc or Tandem MIG™ applications.
  • Pipe welding, pressure vessels, steel buildings and structural steel.

Conformance:

  • AWS A5.18: ER70S-6
  • ASME SFA-5.18: ER70S-6
  • CWB W48-01: ER49S-6

Shielding Gas:

  • 100% CO2
  • 75-95% Ar / Balance CO2
  • 95-98% Ar / Balance O2
  • Flow Rate: 30 - 50 CFH
Alternate Catalog Numbers: 39-7410

Pending Reviews