Lincoln Electric ED016099 SuperArc L-56 Mild Steel MIG Wire - 30 lb. Plastic Spool

*There will be an additional surcharge added to all welding wire after the order is finalized and when checkout has been completed. We apologize for any inconvenience.*

Lincoln's premium copper coated MIG wire, SuperArc® L-56 is an excellent choice for welding on metals with a medium to high presence of millscale.

For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc® L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of SuperArc® L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

Advantages:

• MicroGuard® Ultra surface treatment for superior feeding and arc enhancement agents for excellent arc stability.
• Copper coating provides superior arc starting characteristics, for long contact tip life and is manufactured not to flake, which can clog liners and contact tips.
• Will support all of the traditional modes of GMAW metal transfer: short-circuiting, globular, axial spray, and pulsed spray transfer.
• Well suited for applications where accurate and consistent wire feed are necessary.
• Excellent spatter control and bead profile.
• Manufactured to standards for ISO 14001 environmental and ISO 9001 quality management systems.

Typical Applications:

• For welding on base material that has medium to heavy millscale.
• Automotive repair.
• Sheet metal to multiple pass applications on 55,000 to 70,000 psi (379 to 483 MPa) yield strength base metal.

Conformance:

• AWS A5.18: ER70S-6
• ASME SFA-5.18: ER70S-6
• MIL-E-23765/1: MIL-70S-6
• CWB W48-01: ER49S-6

Shielding Gas:

• 100% CO2
• 75-95% Ar / Balance CO2
• 95-98% Ar / Balance O2
Flow Rate: 30 - 50 CFH