Crouse Hinds CGB398 Water Tight 1" Conector for 6/4 & 8/4 Service Cable
Cord Connector, 1 in Male Thread, .875-1.00 Cord Range Hub size: 2-3/8 in Material: steel CGB, CGD, CGE and CGK cord and cable fittings with neoprene bushing are for use with portable cords and Types MV (unarmored), PLTC, SE (round), TC and UF cables. CGB, CGD, CGE and CGK cord and cable...
Coleman Cable
39-0865
CGB398
-
Product Availability
-
All Other BranchesCheck Availability6 In Stock
| Price | Add to Cart |
|---|---|
|
$96.99
Each
|
|
Cord Connector, 1 in Male Thread, .875-1.00 Cord Range
- Hub size: 2-3/8 in
- Material: steel
- CGB, CGD, CGE and CGK cord and cable fittings with neoprene bushing are for use with portable cords and Types MV (unarmored), PLTC, SE (round), TC and UF cables.
- CGB, CGD, CGE and CGK cord and cable fittings are installed to: provide means for passing a cord, cable (unarmored) or flexible conduit into an enclosure, through a bulkhead or into a rigid conduit; form a seal for cord or unarmored round cables; form a secure connection or termination for flexible cord, cable (unarmored), or flexible conduit.
- Rugged construction protects cord and cable from damage.
- Compact, permitting close grouping of several cords and/or cables.
- Tightening one nut makes watertight seal.
- Available with cable clamp.
- Large range of NPT sizes for use with any conduit system.
- Available for straight, 45 degree or 90 degree entrance.
- Available as conduit stuffing box for bulkheads or partitions from 1/4 inch to 1-1/16 inch thick (CG stuffing box only).
- Many combinations of gland nuts and bushings can be used to make up connectors, provided parts of the same form are used together.
- Certifications and Compliances: UL Standard: 514B. NEC: Class I, Division 2 (May be used in hazardous locations with specific cords and cables when installed in accordance with NEC/CEC requirements); Class II, Class III.
- Wet locations (with neoprene gasket).
- CSA Standard: C22.2 No. 18, 25. CEC: Class II, Division I, Groups E,F,G; Class II, Division 2, Groups F,G; Class III.
- Order wire mesh grip separately.
- Remove sufficient outer covering of cord or cable to pass conductors through the connector body.
Alternate Catalog Numbers: 39-0865
Pending Reviews
Customers Also Bought...
Bosch OSC212FH 2-1/2 In. Multi-Tool Bi-Metal Hammerhead Plunge Cut Blade
Bosch
42-0242
OSC212FH
000346427394
