Fomo Handi-Foam® Sealants

• Seals and fills small gaps
• Stops air infiltration
• Cylinder foam formulation offers brass wand in two different lengths for extended reach and flow rate options

Common applications include:

• Filling cracks and voids
• Sealing around HVAC units
• Filling gaps around pipe penetrations
• Filling gaps behind electrical outlets
• Sealing cracks or spaces at wall and floor joints

Have A Question About Fomo Products?
Please Contact Our Fomo Expert Kevin Kelley @ 888-TRY-DIAMond extension 401


2009 & 2010 Federal Tax Credit Information

For more detailed information on the 2009 & 2010 Federal Tax Credit Programs, please visit www.energystar.gov.

To access or print Fomo Product's Manufacturer Certification Statement, please see link above.

The 2009 economic stimulus package, known as The American Recovery and Reinvestment Act (H.R. 1), promises large cost savings for residential and manufactured home builders.

Tax Credit for Consumers:
For consumers that are adding insulation to a pre existing home, the federal tax credit for installing insulation is 30% of the total product purchase price. The maximum potential tax credit for 2009 and 2010 is $1500. In order for a job to be applicable for the tax credit, the primary goal of the installed insulation should be to insulate. The product must carry a manufacturer's certification and the insulation must be expected to last for at least 5 years, or carry a 2 year warranty.

Solution:
Fomo Products, Inc offers an expansive product mix that meets each of the requirements outlined for the above tax credit. The Handi-Brand products, specifically the Handi-Brand Spray Foam systems, are most commonly used as insulation, to stop air infiltration, and to seal the building envelope. These foam options help to improve indoor air quality, lower heating and cooling costs, and drastically reduce energy consumption.

Tax Credit for Home Builders:
New residential and manufactured home builders are eligible for a $2,000 tax credit. In order to receive the tax credit the newly constructed home must generate 50% energy savings for heating and cooling over the 2004 International Energy Conservation Code (IECC) and supplements or Federal Manufactured Home Construction and Safety Standards.

Furthermore, at least 1/5 of the energy savings must come from building envelope improvements.

Solution:
The use of Fomo’s spray foam systems in critical spaces within the home will optimize energy savings by tightening and sealing potential areas where air infiltration occurs. Some of these critical spaces are attics, crawl spaces, rim joists, windows, doors, and wall cavities. By applying foam to these areas, the builder is able to test for noticeable energy savings as well as receive the tax credit for installing insulation and sealing the building envelope.